Flange resistance

MACOM

The Powerfilm flange resistors are used in generators, attenuators or for the combination of stripline and microstrip lines. For resistors with frequencies up to 4 GHz and power levels up to 800 watts, the resistance value ranges from 5 to 300 ohms, with tolerances from 1% to 5%. The flange dimensions range from 0.3" x 0.2" to 1.9" x 1.0". Other designs can be provided upon request.

Model	Power	Frequency (GHz)	Ceramic Substrate	Resistor Film	Width (Inches)	Length (Inches)	Height (Inches)	Figure
ANR1250-400	400	1.0	AlN	Thin	1.250	0.500	0.170	3
ANR1900-600	600	0.5	AlN	Thin	1.900	1.040	0.190	4
ANR300-10	10	4.0	AlN	Thin	0.300	0.200	0.105	1
ANR300-25	25	4.0	AlN	Thin	0.300	0.200	0.105	1
ANR515-40	40	2.5	AlN	Thin	0.300	0.200	0.125	2
ANR515-80	80	1.0	AlN	Thin	0.300	0.200	0.125	2
ANR800-100	100	3.0	AlN	Thin	0.300	0.200	0.105	3
ANR870-150	150	3.0	AlN	Thin	0.300	0.200	0.105	3
ANR975-200	200	1.0	AlN	Thin	0.300	0.200	0.170	3
PPR1250-400	400	0.5	BeO	Thin	1.250	0.500	0.170	3
PPR1250-650	650	0.5	BeO	Thin	1.250	0.500	0.170	3
PPR1900-800	800	0.4	BeO	Thin	1.900	1.040	0.190	4
PPR300-20	20	4.0	BeO	Thin	0.300	0.200	0.105	1
PPR300-50	50	4.0	BeO	Thin	0.300	0.200	0.105	1
PPR515-125	125	2.5	BeO	Thin	0.515	0.250	0.105	2
PPR515-20-3	20	2.0	BeO	Thin	0.515	0.250	0.125	2
PPR515-30-4	30	2.5	BeO	Thin	0.515	0.250	0.105	2
PPR515-80	80	2.0	BeO	Thin	0.515	0.250	0.125	2
PPR800-40-3	40	4.0	BeO	Thin	0.800	0.230	0.105	3
PPR870-150-3	150	1.0	BeO	Thin	0.870	0.250	0.105	3
PPR870-250	250	1.0	BeO	Thin	0.870	0.375	0.105	3
PPR975-250-3	250	1.0	BeO	Thin	0.975	0.375	0.170	3