Ku Band Power Amplifier Module Specification

Ku Band Power Amplifier Module Specification

1. Structural Diagrams

Figure 1: Structural Schematic

Figure 2: Module Dimensions Diagram

Figure 3: Module Interface Schematic

Parameter	Unit	Specification
Output Power	dBm	≥ 51 dBm @ 14.125GHz
Third-Order Intermodulation (IM3)	dBc	≤ -25.0 dBc (Two equal-amplitude signals with 5MHz spacing, total output power 47dBm)
Gain	dB	≥ 25 dB
Frequency Response	dB@750MHz	≤ 3.0
Frequency Response	dB@Any 40MHz	≤ 1.2
Power Consumption	W@50dBm	≤ 410W (At 100W output power)
Dimensions	mm	80mm * 78mm * 38.5mm (Tolerance: ±2mm)
Input Interface	--	SMA-K
Output Interface	--	WR75 (Horizontal, Non-standard Flange)
Power Supply	V	DC+24V (21.0A)

Interface Type	Pin No.	Definition	Note
Power Supply Socket	1	GND
	2	GND
	3	DC+24V
	4	DC+24V
Monitoring Socket	1	GND
	2	DC+5V
	3	CAN_H
	4	CAN_L
	5	TTL	Turn on at high level
	6	TTL_GND
RF Input	--	SMA-K	Consistent with input interface in specifications
RF Output	--	WR75/BJ120 (Non-standard Flange)	Consistent with output interface in specifications

Note: All dimensions and electrical parameters are subject to the actual product. For further technical support, please contact the supplier.

Superb Automation Co., Limited

Website:www.superb-tech.com

For 25 years your reliable partner in Electronics & PCBA!

HK number: 85260404363

Email :Info@superb-tech.com

Whatsapp:8613396081443